tent rail The Shadowline
SKU: 80850547157
tent rail

tent rail The Shadowline

Sale price$18.32 Regular price$20.35
Save 10%

Pay in installments of $5.09 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 2 - Jul 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

tent rail The ShadowlineThe Shadowline Low Profile Mounts for Stealthy Rigs Your rack sits flush. That's the point. You picked a Sherpa, a Prinsu, a TrailRax something that hugs the roofline so the rig still fits the garage and still looks like a vehicle, not a parade float. Then you mounted a tent on it. And the gap between the tent and the rack disappeared. Now reaching the mounting hardware means lying across the roof, peeling skin off your knuckles, and accepting that

The Shadowline — Low-Profile Mounts for Stealthy Rigs

Your rack sits flush. That's the point. You picked a Sherpa, a Prinsu, a TrailRax — something that hugs the roofline so the rig still fits the garage and still looks like a vehicle, not a parade float.

Then you mounted a tent on it. And the gap between the tent and the rack disappeared.

Now reaching the mounting hardware means lying across the roof, peeling skin off your knuckles, and accepting that the tent is staying on this season.

The Shadowline is built for that exact problem. Six low-profile mounts. A grab tool that lets you reach the latches without removing crossbars. Once you set it up, the tent comes off in under a minute.


How It Works

Six tent bushings (the male attachments) attach to your rooftop tent. Six female mounts attach to your roof rack. The front and rear pairs feature sliding latches that secure the bushings in place. The middle pair is passive — once aligned, they hold and stay.

To release: reach in with the supplied grab tool, slide the latches open, slide the tent rearward about four inches, lift it off.

The mounts raise the tent roughly half an inch above the crossbar surface. That clearance is intentional — it keeps awning brackets clear and stops unsupported crossbars from rattling against the tent rails when you're off-pavement.

Designed for SUVs and trucks running low-profile roof racks: 4Runners, Broncos, Tacomas, and similar rigs running Sherpa, Prinsu, TrailRax, UpTop, Wescott, and other top-mount platforms.


To Install

  1. With the tent off the rack, open all four latching mounts (by hand or with the grab tool).
  2. Place the tent on the rack, centering it so the six tent bushings align with the six vehicle-mounted brackets.
  3. Slide the tent forward until all six bushings are fully seated.
  4. Latch all four sliding mounts to lock the bushings in place. The middle pair is passive — once seated, they hold.
  5. Optional: lock the four latching mounts with 1/4″ locking pins (sold separately).

To Remove

  1. Remove the optional locking pins, if installed.
  2. Use the grab tool to release all four sliding latches.
  3. Slide the tent rearward about four inches. All six bushings disengage.
  4. Lift the tent vertically off the rack.

What's Included

  • Six female mount assemblies — two front, two middle, two rear (powder-coated 1/8″ 304 stainless steel)
  • Six tent bushing assemblies — stay fixed to the tent so no measuring is required after install
  • One dual-purpose grab tool — handles both installation and operation
  • One stainless steel hardware kit — for attaching the female mounts to the roof rack

Lockable mounts: The four mounts with sliding latches accept 1/4″ locking pins (the same kind used for trailer tongue locks). Lock sold separately if you want it.

Hardware note: The kit ships with 1/4″-20 hardware — the most common roof rack size. Some racks (AluCab, Slimline, Leitner, others) use M8. Sold separately if you need it.

Not compatible with GOBI roof racks or any rack without top-facing mounting channels.


Recognition

A previous iteration of this design was named Best Gear of Overland Expo PNW 2024 by Overland Expo staff.


Installation Disclaimer

The first install is the hardest part. That's not a marketing problem — that's physics. Low-profile racks limit how much room you have between the rack and the tent. Tightening the hardware in tight spots takes patience.

Think of it like changing rear spark plugs on a V8 engine. The first ones go fast. The last ones take a steady hand and a good wrench. The Shadowline is the same: the included long-extended wrench is shaped specifically for those bolts. Use it.

If your vehicle doesn't have a sunroof or removable top, you'll need to remove the front fairing of the rack to reach the front mounts during install.

Set aside the time. Pick a Saturday morning. Cold beverage, decent music, no rush.

Do it once, do it patiently. After that, the tent comes off in under a minute every time. That's the trade.


Compatibility At a Glance

  • Roof rack type: low-profile / top-mount channels (Sherpa, Prinsu, TrailRax, UpTop, Wescott, similar)
  • Vehicle types: SUVs and trucks with low-profile racks (4Runners, Broncos, similar)
  • Tent height: raises ~½″ above crossbar surface (clearance for awning brackets, anti-rattle)
  • Hardware included: 1/4″-20; M8 sold separately for AluCab, Slimline, Leitner, etc.
  • Lockable: yes — 1/4″ locking pins compatible (lock sold separately)
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 80850547157

Discover Niche Categories That Outsell tent rail

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 2450 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
Brian S
Birmingham, US
★★★★★ 5
Fits
Size: 5424WS, Style: Workshop
Perfect fit for my 2019 Toyota Highlander. Quality filter.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
M
Verified Purchase
Molar1
Omaha, US
★★★★★ 5
Works and fits my vehicle.
Size: 5424WS, Style: Workshop
The price is reasonable and was delivered on time. It’s a filter so there’s not much you can grade this on unless you do scientific analysis. Be certain to buy the filter that fits your car.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
A
Verified Purchase
A A
Waukegan, US
★★★★★ 4
Good filter
Size: 5424WS, Style: Workshop
It seems to be working. It’s not something that will make a tangible difference, but it fit my car and was easy to install.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2024
M
Verified Purchase
MagicMan34
Belleville, US
★★★★★ 5
Top quality at great price
Size: 5424WS, Style: Workshop
These are great filters for the money. The car dealer wanted 80 dollars to replace it. This can be done by anyone and buying it on here is even more savings. Do not fall for it at the dealer. Save your hard earned money!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
A
Verified Purchase
Aliza
Alexandria, US
★★★★★ 5
Excellent Engine Air Filter — Keeps Your Engine Breathing Clean!
Size: 5424WS, Style: Workshop
It’s a high‑quality replacement that does exactly what you want from an engine air filter — it helps protect your engine and keeps performance strong. Right away you can tell this is a well‑made part. The filter media has lots of pleats and high‑velocity cellulose material that’s designed to trap dirt and contaminants before they get into your engine, which helps reduce wear and tear on vital components. It offers up to ~98% filtration efficiency, so you know the incoming air is much cleaner and better for performance and fuel efficiency.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2026

recommand products